Skip to main content

Oracle DB

Features

FeatureSupportedNotes
Full Refresh SyncYes
Incremental - Append SyncYes
Replicate Incremental DeletesComing soon
Logical Replication (WAL)Coming soon
SSL SupportComing soon
SSH Tunnel ConnectionYes
LogMinerComing soon
FlashbackComing soon
NamespacesYesEnabled by default

The Oracle source does not alter the schema present in your database. Depending on the destination connected to this source, however, the schema may be altered. See the destination's documentation for more details.

Getting Started (Airbyte Cloud)

On Airbyte Cloud, only TLS connections to your Oracle instance are supported. Other than that, you can proceed with the open-source instructions below.

Getting Started (Airbyte Open Source)

Requirements

  1. Oracle 11g or above
  2. Allow connections from Airbyte to your Oracle database (if they exist in separate VPCs)
  3. Create a dedicated read-only Airbyte user with access to all tables needed for replication

1. Make sure your database is accessible from the machine running Airbyte

This is dependent on your networking setup. The easiest way to verify if Airbyte is able to connect to your Oracle instance is via the check connection tool in the UI.

This step is optional but highly recommended to allow for better permission control and auditing. Alternatively, you can use Airbyte with an existing user in your database.

To create a dedicated database user, run the following commands against your database:

CREATE USER airbyte IDENTIFIED BY <your_password_here>;
GRANT CREATE SESSION TO airbyte;

Next, grant the user read-only access to the relevant tables. The simplest way is to grant read access to all tables in the schema as follows:

GRANT SELECT ANY TABLE TO airbyte;

Or you can be more granular:

GRANT SELECT ON "<schema_a>"."<table_1>" TO airbyte;
GRANT SELECT ON "<schema_b>"."<table_2>" TO airbyte;

Your database user should now be ready for use with Airbyte.

3. Include the schemas Airbyte should look at when configuring the Airbyte Oracle Source.

Case sensitive. Defaults to the upper-cased user if empty. If the user does not have access to the configured schemas, no tables will be discovered.

Connection via SSH Tunnel

Airbyte has the ability to connect to a Oracle instance via an SSH Tunnel. The reason you might want to do this because it is not possible (or against security policy) to connect to the database directly (e.g. it does not have a public IP address).

When using an SSH tunnel, you are configuring Airbyte to connect to an intermediate server (a.k.a. a bastion sever) that does have direct access to the database. Airbyte connects to the bastion and then asks the bastion to connect directly to the server.

Using this feature requires additional configuration, when creating the source. We will talk through what each piece of configuration means.

  1. Configure all fields for the source as you normally would, except SSH Tunnel Method.
  2. SSH Tunnel Method defaults to No Tunnel (meaning a direct connection). If you want to use an SSH Tunnel choose SSH Key Authentication or Password Authentication.
    1. Choose Key Authentication if you will be using an RSA private key as your secret for establishing the SSH Tunnel (see below for more information on generating this key).
    2. Choose Password Authentication if you will be using a password as your secret for establishing the SSH Tunnel.
  3. SSH Tunnel Jump Server Host refers to the intermediate (bastion) server that Airbyte will connect to. This should be a hostname or an IP Address.
  4. SSH Connection Port is the port on the bastion server with which to make the SSH connection. The default port for SSH connections is 22, so unless you have explicitly changed something, go with the default.
  5. SSH Login Username is the username that Airbyte should use when connection to the bastion server. This is NOT the Oracle username.
  6. If you are using Password Authentication, then SSH Login Username should be set to the password of the User from the previous step. If you are using SSH Key Authentication leave this blank. Again, this is not the Oracle password, but the password for the OS-user that Airbyte is using to perform commands on the bastion.
  7. If you are using SSH Key Authentication, then SSH Private Key should be set to the RSA Private Key that you are using to create the SSH connection. This should be the full contents of the key file starting with -----BEGIN RSA PRIVATE KEY----- and ending with -----END RSA PRIVATE KEY-----.

Generating an SSH Key Pair

The connector expects an RSA key in PEM format. To generate this key:

ssh-keygen -t rsa -m PEM -f myuser_rsa

This produces the private key in pem format, and the public key remains in the standard format used by the authorized_keys file on your bastion host. The public key should be added to your bastion host to whichever user you want to use with Airbyte. The private key is provided via copy-and-paste to the Airbyte connector configuration screen, so it may log in to the bastion.

Data Type Mapping

Oracle data types are mapped to the following data types when synchronizing data. You can check the test values examples here. If you can't find the data type you are looking for or have any problems feel free to add a new test!

Oracle TypeResulting TypeNotes
binary_doublenumber
binary_floatnumber
blobstring
charstring
char(3 char)string
clobstring
datestring
decimalnumber
floatnumber
float(5)number
integernumber
interval year to monthstring
long rawstring
numbernumber
number(6, 2)number
nvarchar(3)string
rawstring
timestampstring
timestamp with local time zonestring
timestamp with time zonestring
varchar2string
varchar2(256)string
xmltypestring

If you do not see a type in this list, assume that it is coerced into a string. We are happy to take feedback on preferred mappings.

Encryption Options

Airbyte has the ability to connect to the Oracle source with 3 network connectivity options:

1.Unencrypted the connection will be made using the TCP protocol. In this case, all data over the network will be transmitted in unencrypted form. 2.Native network encryption gives you the ability to encrypt database connections, without the configuration overhead of TCP / IP and SSL / TLS and without the need to open and listen on different ports. In this case, the SQLNET.ENCRYPTION_CLIENT option will always be set as REQUIRED by default: The client or server will only accept encrypted traffic, but the user has the opportunity to choose an Encryption algorithm according to the security policies he needs. 3.TLS Encrypted (verify certificate) - if this option is selected, data transfer will be transfered using the TLS protocol, taking into account the handshake procedure and certificate verification. To use this option, insert the content of the certificate issued by the server into the SSL PEM file field

Changelog

VersionDatePull RequestSubject
0.4.02023-06-2627737License Update: Elv2
0.3.252023-06-2027212Fix silent exception swallowing in StreamingJdbcDatabase
0.3.242023-03-2220760Removed redundant date-time datatypes formatting
0.3.232023-03-0623455For network isolation, source connector accepts a list of hosts it is allowed to connect to
0.3.222022-12-1420436Consolidate date/time values mapping for JDBC sources
2022-10-1315535Update incremental query to avoid data missing when new data is inserted at the same time as a sync starts under non-CDC incremental mode
0.3.212022-09-0116238Emit state messages more frequently
0.3.202022-08-1814356DB Sources: only show a table can sync incrementally if at least one column can be used as a cursor field
0.3.192022-08-0314953Use Service Name to connect to database
0.3.182022-07-1414574Removed additionalProperties:false from JDBC source connectors
0.3.172022-06-2414092Introduced a custom jdbc param field
0.3.162022-06-2213997Fixed tests
0.3.152022-04-2912480Query tables with adaptive fetch size to optimize JDBC memory consumption
0.3.142022-02-2110242Fixed cursor for old connectors that use non-microsecond format. Now connectors work with both formats
0.3.132022-02-1810242Updated timestamp transformation with microseconds
0.3.122022-02-1410256Add -XX:+ExitOnOutOfMemoryError JVM option
0.3.112021-12-248958Add support for JdbcType.ARRAY
0.3.102021-12-078582Update connector fields title/description
0.3.92021-12-018371Fixed incorrect handling "\n" in ssh key
0.3.82021-10-137125Fix incorrect handling of LONG RAW data type
0.3.72021-10-016616Added network encryption options
0.3.62021-09-306585Improved SSH Tunnel key generation steps
0.3.52021-09-226356Added option to connect to DB via SSH.
0.3.42021-09-016038Remove automatic filtering of system schemas.
0.3.32021-09-015779Ability to only discover certain schemas.
0.3.22021-08-134699Added json config validator.